Custom work . If you can think it, we can build it!
Here is what two of our customers had to say about our custom work that was done for them and a few other friends.. See photos of the AR-99 below the copy of his post from the forum. | rob d
|
I wanted to say thanx to everyone who replied with their opions on this subject - its nice to see people helping a new guy
A big thanx to Doc (he has built about 10 replicas for me and my coworkers) who has always been exceedingly honest and for doing great custom work
he could have made more money for things i didnt/couldnt need but like i said is an honest man
The LR-99 is my latest from him and hes also doing a G3 lmg conversion
Doc you have me and my guys business period
thanx again to everyone who replied --------------------------------------------------------------------------------------- Ok, anyone who needs up grades OR custom work, Contact DOC on here, His name is Lon and he does a kick a** job, A couple years ago I had Him do my ICS M-4, recently I had him work on a MP5. Both of witch I am pleased to say he did a EXCELLENT job on.
_________________
Only the strong shall survive. |
|
View of the front half of the AR-99 Rifle.
The front half of the AR-99 Rifle is a Bushmaster Firearms conversion kit made to upgrade a C15 P21/P97 Pistol to a P21S configuration. But we used it here to build our AR-99 Rifle. |
Center area of the AR-99, Top rail and rear sight.
The top central rail has a vary nice rear sight that is built into the rail, but with this long rail you have all kinds of room for just about any scope or Red Dot sight you wish to place on it. You would also still have room for a Laser or Tac Light. |
Full view of the AR-99 Rifle
As you can see here, you have a nice size lower rail for a Laser or Tac Light, just about anything that uses a 1913 Rail will work here. The rifle also has a nice battery pouch that will hold most batterys from a 8.4v mini to a 9.6v C or Sub-C battery pack. |
The AR-99 in the center
As you can see the AR-99 is just smaller then the MP5 SD and just a little bigger then the MP5 K. The AR-99 also works well with the UZI 9mm kit, and it just looks killer on the AR-99.. |
Custom SPR Mk.14 & M16A4 SDMR
Both of the rifles in the photo belong to me. The M16A4 SDMR still needs a sweet looking scope but is done for now, both inside and outside. The SPR Mk.14 is all done, both inside with full upgrade and outside with all the toys on it. |
A view from the front end.
Both rifle have real steel front end parts from Bushmaster, Knight's, Yanky Hill along with others. The M16A4 SDMR comes in just at 12lbs with out a battery and full mag, the SPR Mk.14 comes in at just under 10lbs with out a battery and full mag. TheSPR Mk.14 has a Tasco 4-16x42mm scope with a bullet impact turent. The M16A4 SDMR will have a6.5-20x50mm scope with target turents and ARD, it will also have a mount for a Harris as the SPR Mk.14 does now. |
View of front half of the rifles.
Fron this pic you can get a good view of the M16A4 SDMR gas rod, and flip up Yanky Hill front sight. |
